Versions 2019.1.8/2020.1.2

Naviate Site & Landscaping

Main updates include improvements to UI/UX & floor slope arrow.

Summary

SITE & LANDSCAPING
GENERAL
  • UI/UX improvements
  • Floor slope arrow
  • 3D Zone
  • Family browser
  • Filter elements
  • Edit parameters
  • Transfer calculated values
  • Type symbols
  • Color elements
  • View filter manager
  • Provisions for voids
  • Global IFC class

 

Naviate Site & Landscaping

Changes are available both in 2019.1.8 and 2020.1.2 if not otherwise stated in headlines.

UI/UX Improvements

We have rearranged the tools in the Ribbon and separated them into individual panels

Naviate site and landscaping ui ux

Pre-selection of elements are now supported for the following tools: Align Topo, Floor, Cut&Fill, and Add Region.

Floor Slope Arrow

Following improvements have been made on the Roof Slope Arrow tool:

  • The tool gives you an graphic indicator that will show you which points are wrong in cases when the Slope Arrows are connected in a circular manner.

naviate site and landscaping floor slope arrowsnaviate site and landscaping 1.5

  •  Added the possiblity to add Slope Arrow points relative to Level

naviate site and landscaping floor slope arrows 2

 

General

Changes are available both in 2019.1.8 and 2020.1.2 if not otherwise stated in headlines.

3D Zone

We have made significant improvements to performance and usability:

  • Much faster to select 3D Zones in Filter Elements and Write Parameters tools
  • Added a progress bar with Cancel option that is visible on all tools where you select a 3D Zone in Filter Elements and Write Parameters tools
  • Filter Elements, Write Parameters and Write All tools now give same result for selected 3D Zone
  • Write Parameters start much faster since no 3D Zone is selected at startup. It is also much faster to select 3D Zone in the tool
  • Create 3D Zones from Floors. The tool now supports creating 3D Zones from Scope Boxes, Filled Regions and Floors; the option to create from Lines are removed.
  • Increased stability with 3D Zones containing circle and ellipse elements
  • Improved input validation to avoid creating improper 3D Zones

Family Browser

You can now update the project with a newer version of a family on disk using the “Load Family” option from the right click menu.

Naviate Update Family Browser

Filter Elements

We have made improvements regarding the default settings when starting the tool. Now “Elements in View” is default and no Categories are selected when starting the tool. The Settings combo box show <Select setting>. Either configure what to filter or:

  • Select <In Session> setting to get the setting you had last time you used Filter Elements and pressed Close button
  • Select any of the <Recent Filter X> settings that are automatically saved when clicking on Select Elements button (the last five settings are saved)
  • Select any of the named settings that has been created in the project
  • Select <Select Setting> to “clear” the dialog box and get back to initial state

We have also made the following improvements:

  • You can resize the dialog box again
  • Improved performance when selecting 3D Zones (see also 3D Zone above)

Naviate Update Filter Elements 

Edit Parameters

You can now show the instance count column for Types without having to include showing read-only parameters

Naviate Update Edit Parameters

Transfer Calculated Values

We have added the ability to copy a Formula or Combined parameter from a Schedule to a parameter on the element with same Type. A calculated Area can for example be calculated to any project parameter of type Area or Text. Before was only Text parameters supported.

Naviate update transfer calculated values

Type Symbols

We have made several changes to improve the tool:

  • It is possible to create multiple legend views with different categories for the same view
  • You can enter a prefix for the names on the legend views that are being created
  • You can see what views or sheets that was pre-selected and that you will create legend views for
  • You can include a Count column that display the number of instances of the type in the view/sheet

Naviate update type symbols

  • The length of the columns is automatically adjusted to the longest text.
  • You can update a legend view by selecting it and running the feature again; the tool remembers the settings used to create it. Additional parameters can be added or removed

Naviate update type symbols 2

Color Elements

Improved UI for creating View Filters.

 Naviate update Color Elements

View Filter Manager

We have improved the stability when changing between projects with the tool open.

Provisions for Voids

All dialog boxes in PfV tools has new look.

Naviate update provisions for voids

Global IFC Class

We have added a “short cut” to the Revit tool for defining what IFC Classes that should be exported for each category in the IFC Pull down.

Naviate Update global IFC

Naviate Simple BIM 2019.2

A new version of Naviate Simple BIM is now available for download with improvements to the Table Palett, Model Placement Editor, Scrips and more.

Naviate 2020.2 for Civil 3D is released! And 2019.5!

Naviate 2020.2 for Civil 3D is now available for download. Same version is released as Naviate 2019.5 for Civil 3D 2019. This version includes a number of new features including an important update of Naviate subassemblies. It also includes a Naviate version for UK and Ireland.
Show more
{{lineitem.ProductName}}

Support Plan: {{lineitem.VariantPackage}}
License: {{lineitem.VariantLicense}}
{{lineitem.Quantity}} x {{lineitem.FormattedTotalExclTax}} {{lineitem.FormattedPriceExclTax}}

Your cart is empty ;(
Total {{basket.FormattedOrderTotalExclTax }}
Checkout