Naviate Landscape

Slope Arrow

Draws a Slope Arrow with entered slope or elevation difference and automatically adds a label.

  3D-measure

Inserts 3D-blocks at measured intervals along the length of a 3D Polyline or a Feature Line.

Plant data

Applies plant data to any object by reading property data from any CSV-file and stores it as Property Set.

Line-set

Creates a dynamic line-set from an offset and difference in elevation from a selected polyline.

Rotate Text

Rotates text, labels, blocks, points, Cogo Points etc. along a polyline, alignment or fixed angle.

Add label group to featureline

Creates a label group for individual Featurelines or for all Featurelines in a corridor.

  Slope patterns

Creates slope patterns between two lines, polylines or 3d-Linje/Feature lines.

  Sub surface

Creates one or more Sub Surfaces as an offset to an existing Surface as well as creates volume surfaces for each layer.

  Edit Elevations by Values

Raises or lowers vertexes on a Feature Line and Civil3D points by entering values for Raise/Lower, Difference, Grade, Slope, Elevation or Interpolation.

Extrude along path

Extrudes any closed profile along a path. The created solid can be updated after the profile or extrude path has been modified.

Merge featureline

Merges several Featurelines into a new Feature line, the Merged Feature Line can later be updated to reflect the changes of the original Featurelines.

Dynamic featureline

Creates a dynamic featureline as an offset to the source feature line. The dynamic featureline can later be updated when the source featureline has been modified.

Edit Elevations by Scroll-wheel

Raises or lowers vertexes on a Feature Line or Civil3D points by scrolling on the mouse wheel or by setting a fixed elevation, and automatically rebuilds connected surfaces.

Max/Min Surface

Creates a surface from minimum or maximum values of two surfaces. The surface is created where the surfaces overlap and is created by both surfaces’ triangles.

  Stepped Profile

Creates a profile in steps of fixed lengths and heights. Combining the tools Stepped Profile, Solids From Corridor and the Retaining Wall Subassembly allows you to create Precast Retaining Walls.

Kerbstone Quantification

A simple tool to quantify the number of Kerbstones with different standard radiuses. Supports alignments, polylines, arcs and lines. The result is saved in a property set on the objects.